Shanghai Chuangyi Hollow Glass Material Co., Ltd.
Products
Contact Us
  • Contact Person : Mr. luo jin
  • Company Name : Shanghai Chuangyi Hollow Glass Material Co., Ltd.
  • Tel : 86-21-31174960,31174961,31174962
  • Fax : 86-021-39972783
  • Address : Shanghai,Shanghai,NO 2158 JiaLuo Road,Jiading District,Shanghai
  • Country/Region : China
  • Zip : 201819

molecular Sieve

molecular Sieve
Product Detailed
Related Categories:Chemical Auxiliary Agent
1,Dry and refine the air 2,Refine petroleum 3,Dry and refine natural gas and gas in other industries.

Professional manufacturer and exporter for Molecular Sieve 3A Beads 4*8mesh 8*12mesh Pellets 1/16 inch 1/8 inch

XINTAO Molecular sieve 3A

 

Introduction:

Molecular Sieve 3A is an alkali metal alumina-silicate; it is the potassium form of the type A crystal structure. Type 3A has an effective pore opening of about 3 angstroms (0.3nm). This is large enough to allow in moisture, but excludes molecules such as unsaturated hydrocarbons which can potentially form polymers; and this maximizes lifetime when dehydrating such molecules.

Typical Chemical Formula

0.45 K2O . 0.55 Na2O . Al2O3 . 2 SiO2 . 4.5H2OSiO2 : Al2O3 ≈2

Technical Parameter 

Item

Unit

Technical data

Shape

 

Pellet

Sphere

Diameter

/

1/16 inch

1/8 inch

8*12 mesh

4*8mesh

Size ratio up to grade

%

≥98

≥98

≥96

≥96

Bulk density

g/ml

≥0.65

≥0.65

≥0.70

≥0.70

Wear ratio

%

≤0.20

≤0.25

≤0.10

≤0.10

Crushing strength

N

≥45/cm

≥60/cm

≥45/piece

≥85/piece

Static water adsorption

%

≥21

≥21

≥21

≥21

Water content, as shipped

%

≤1.5

≤1.5

≤1.5

≤1.5

  

 

 

 

 

 

 

 

 

 

Typical Application

1) Drying of unsaturated hydrocarbons (e.g. ethylene, propylene, butadiene) 2) Cracked Gas Drying3) Drying of natural gas, if COS minimization is essential, or a minimum co-adsorption of hydrocarbons is required. 4) Drying of highly polar compounds, such as methanol and ethanol5) Drying of liquid alcohol6) Static, (non-regenerative) dehydration of insulating glass units, whether air filled or gas-filled.7) Drying of refrigerants

Regeneration

XINTAO molecular sieve Type 3A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. To remove moisture from a 3A molecular sieve, a temperature of 200-230°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C.The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.

Size

3A – zeolite are available in beads of 1-2 mm, (10x18 mesh) 2-3 mm, (8x12 mesh) , 2.5-5 mm, (4x8 mesh) and as powder, and in pellet 1/16inch 1/8inch

Attention

To avoid damp and pre-adsorption of organic before running, or must to be reactivated.

molecular Sieve



Copyright Notice @ 2008-2022 ECBAY Limited and/or its subsidiaries and licensors. All rights reserved.