- Contact Person : Mr. luo jin
- Company Name : Shanghai Chuangyi Hollow Glass Material Co., Ltd.
- Tel : 86-21-31174960,31174961,31174962
- Fax : 86-021-39972783
- Address : Shanghai,Shanghai,NO 2158 JiaLuo Road,Jiading District,Shanghai
- Country/Region : China
- Zip : 201819
Molecular Sieve
Professional manufacturer and exporter for Molecular Sieve 3A Beads 4*8mesh 8*12mesh Pellets 1/16 inch 1/8 inch
XINTAO Molecular sieve 3A
Introduction:
Molecular Sieve 3A is an alkali metal alumina-silicate; it is the potassium form of the type A crystal structure. Type 3A has an effective pore opening of about 3 angstroms (0.3nm). This is large enough to allow in moisture, but excludes molecules such as unsaturated hydrocarbons which can potentially form polymers; and this maximizes lifetime when dehydrating such molecules.
Typical Chemical Formula
0.45 K2O . 0.55 Na2O . Al2O3 . 2 SiO2 . 4.5H2OSiO2 : Al2O3 ≈2
Technical Parameter
Item | Unit | Technical data | |||
Shape |
| Pellet | Sphere | ||
Diameter | / | 1/16 inch | 1/8 inch | 8*12 mesh | 4*8mesh |
Size ratio up to grade | % | ≥98 | ≥98 | ≥96 | ≥96 |
Bulk density | g/ml | ≥0.65 | ≥0.65 | ≥0.70 | ≥0.70 |
Wear ratio | % | ≤0.20 | ≤0.25 | ≤0.10 | ≤0.10 |
Crushing strength | N | ≥45/cm | ≥60/cm | ≥45/piece | ≥85/piece |
Static water adsorption | % | ≥21 | ≥21 | ≥21 | ≥21 |
Water content, as shipped | % | ≤1.5 | ≤1.5 | ≤1.5 | ≤1.5 |
Typical Application
1) Drying of unsaturated hydrocarbons (e.g. ethylene, propylene, butadiene) 2) Cracked Gas Drying3) Drying of natural gas, if COS minimization is essential, or a minimum co-adsorption of hydrocarbons is required. 4) Drying of highly polar compounds, such as methanol and ethanol5) Drying of liquid alcohol6) Static, (non-regenerative) dehydration of insulating glass units, whether air filled or gas-filled.7) Drying of refrigerants
Regeneration
XINTAO molecular sieve Type 3A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. To remove moisture from a 3A molecular sieve, a temperature of 200-230°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C.The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process.
Size
3A – zeolite are available in beads of 1-2 mm, (10x18 mesh) 2-3 mm, (8x12 mesh) , 2.5-5 mm, (4x8 mesh) and as powder, and in pellet 1/16inch 1/8inch
Attention
To avoid damp and pre-adsorption of organic before running, or must to be reactivated.
Molecular Sieve